No Picture
General Article

The Process Of Hiring a HVAC Contractor

When the heating or cooling unit in your house breaks, it can be hard to find someone to fix it. How do you find quality repairmen at a reasonable price? This article offers some tips on finding the perfect HVAC contractor.

The first thing that you need to do is research an ac system installation cincinnati oh. It is a good idea to research before a problem with the unit happens. If you get caught up in the hot or cold, then it can be easier for someone to pressure you into quick fixes. Scam artist love to prey on people who feel they are in bad situations.

You should find out what type of licenses and insurance that HVAAC contractors need in your area. The licenses vary by state but may include mechanical contractor license, license with the board of health, or C-20 HVAC license. The next step is to find references. Ask friends or family what HVAC contractor that they use. You can also check websites like The Better Business Bureau and Angie’s List. People will generally gladly give a review if the service was horrible or pleasant.

Then narrow the contractors down to three or four that you would like to come to your house for an estimate. The best way to do this is through a phone interview. Call the company and verify that they have the certifications and licenses. Ask how long they have been in business, and what manufactures do they work for. The contractors should work for at least two manufacturers. If they only work for one, they may act only as salesmen for that particular brand.

The contractor should do a free home expectation before they give you a price. The contractor needs to look at the whole house to get an idea of what is needed. Major changes to the house may have occurred since the last inspection. Also be wary of contractors that want to install a larger unit, just in case.

If the unit needs replaced look for energy star appliances. Energy Star products meet guidelines set by the Environmental Protection Agency. The air cooling unit needs to have a SEER rating between 10 to 12. A heat pump needs to have an EER rating of 12. A gas heater should have fuel efficiency of around 90 percent, and a fuel burner should have the efficiency at around 85 percent.

When receiving bids, make sure to get them in writing. If a bid seems high, ask why. The contractor could have spotted a problem that the other contractors did not see. Comparing bids might be hard when each company wants to sell you a different unit. Go online and shop around, do research on each unit before buying.

Read the contract carefully before signing. Make sure that all guarantees are written down. The contractor should not expect the final payment until you are happy with their work. The contractor should be happy to receive a check or money order instead of cash.

With a bit of research, it is easy to find an HVAC contractor that can give you good service. After the contractor finishes give them a review online. The review will help someone else in the process of finding a good contractor.

No Picture
General Article

Preparing for the Coming Winter

The next couple of months are going to be very cold. As a matter of fact, they are going to be some of the coldest days of the years because it is winter. This means you have to make sure that your heater is working. The good news is that it is still not too late to be ready for the winter. If you have a heating unit, the good news is that there are a few steps that you can take in order to make sure that the heater is in working condition so that you can survive your winters.

The furnace is one of the most important factors for the winter. Therefore, you want to know how to provide maintenance to your heater so that it can work well for your home and keep everything warm during the colder days of the year. Another factor is that while the furnace might be working, it could be working a little harder than it should. You will notice it when you are paying your utility bill. If the furnace is working very hard, then there are ways that you can reduce the amount of work it has to do in order to keep your home warm.

One very important factor in your furnace is the air filter. You either have to clean your filter or replace it. One of the reasons the air filter needs to be checked is that a lot of stuff gets caught in the filter over time. Once the filter has enough dust and other particles settled on it, the air quality is going to be affected. As a result, it air conditioner is going to be working harder to bring the air to the desired level of temperature for the comfort of the household.

If your heater is having issues and you have tried everything you can to take care of it, then you might want to get some kind of service done on the unit. Before looking into any heating installation fort collins co services, you might want to look into getting your heater repaired so that you can continue to enjoy the warmth of the home during the winter. However, if the repairman can’t fix it, then a new heater might be a good idea. Another thing to do is schedule a regular maintenance service for your heater so that you can make sure that you are going to have an effective heater.

Your heater will work well for you if you take care of it. If you manage to take care of your heater, then you will be able to save money while you enjoy the temperature that you have it set at. With a good heater, you are not going to have to bundle up a lot. If you have to get a new heater, doing a lot of research on everything about the heater is important. You also want to get information from the professional on how to take care of the hearing unit.…

No Picture
General Article

Consider a Split System When Shopping for a New HVAC

A lot of consumers become more confused than when they started as they begin using the web to research something as in-depth as a HVAC system. As you’ve googled strings such as, “residential air conditioning installation lexington park md,” you’ve likely seen the words, “split system,” being used quite a bit. A lot of people that want to install a new HVAC system, or even update their current one, are in the complete dark when it comes to the types of systems that are out there. Over three quarters of people with a central heating and air system within their home possess a split system. We’ll discuss what a split system is and also take a look at some of the advantages that such a system might offer over others.

Advantages of a Split System

Split systems are more costly initially, so people always seem quite eager to get to the benefits of such systems. Hands down, there is not a more efficient way to achieve whole home heating and cooling than with a split system. Also, consider that as time passes, you can spread this initially higher cost over the life of a split system and see that it might actually be cheaper than some of the alternatives that are out there. Convenience is another factor that is often cited by owners of a split system. The end user only has to approach one thermostat and he/she can control the temperature of all the rooms of the home at once.

The Name Says It All

As the name suggests, these systems are split. What are they split between? The indoor components and the outdoor ones! That’s right, these systems utilize a variety of components both within your home and right outside of it. Let’s take a look at the most common outdoor components…

It’s Just the Condenser Unit

The condenser unit is the lone unit in the category of, “outside components.” A condenser coil and compressor are stored within this metal device that is oftentimes found on one side of the home. When the device kicks on, you will often see a fan blowing the warm air from the coils into the great outdoors!

What Parts are Inside of the House?

The Air Handler is the first item that many people think of when they hear HVAC. In most cases, an air handler will be stored within the attic somewhere. Another type of coil is inside of this handler. Not the condenser coil but the evaporator one. The blower is also inside of such a cabinet. This is why the device is usually referred to as the air handler. There are a few other components inside though…

Air Ducts and the Thermostat

The air handler will typically feed it’s blown air directly into ducts that dump off into multiple locations throughout the home. There is usually, at the very least, one vent fed by such a duct within each room of the home. The thermostat is on your hallway wall and controls the equipment. That’s the easy component that everybody is familiar with!